Calgary paint protection films Archives - Calgary Paint Protection Film

Application of Calgary Paint Protection Film

Once the car is immaculate and dry, it’s time to apply Calgary paint protection film. The technicians spray a film solution over the area to begin. This solution has two purposes: it protects the film during installation and allows slip so the film can be moved into position. The film is carefully applied with clean hands and wet fingers so as not to leave fingerprints behind.

Paint Protection Film Gets Squeegeed into Place

The 3M car wrap is carefully positioned on the vehicle, and then a squeegee is used to remove the moisture and work the film into its permanent position and shape. When the paint protection film is in place, the squeegee is used to remove air bubbles by applying gentle pressure from the middle outward.

Heat Sets the Film’s Memory

Protective films will return to their original shape; this is called memory. Technicians apply heat to the installed Calgary paint protection film to reset the memory so that the film stays in its new form. Failing to do this properly causes peeling and lifting.

From window tinting Calgary to full wraps, installing protective film takes time, training, and attention to detail. In the end, you’ll have a barrier protecting your vehicle’s paint, so it looks great.

Be sure to treat your vehicle right by contacting the experts at Calgary Paint Protection Film. You can always expect friendly and prompt service. We work around your schedule to provide maximum convenience. Keep your car looking like new, the easy way! Phone: 587-324-1993

You want your car to look its best, and you should. The appearance of a vehicle makes a difference in resale value and creates an impression on the road. You may have heard of paint protection films and wondered whether they would benefit your vehicle. Here’s a look at paint protection film compared to other protective films and coatings.

Waxes and Sealants

These products function similarly, but waxes are a natural product and sealants are synthetic. Both products are applied to the car to protect the finish; they may be applied and removed, applied then buffed, or sprayed on. Sealants typically last longer than waxes, but both products must be applied frequently to be effective.

Coatings

Often made from ceramics, coatings last longer than waxes and sealants and can take a lot more wear and tear. They tend to produce a candy-coated appearance.

Paint Protection Film

Paint protection film is a film applied to the vehicle to protect the finish. Films offer the best protection and durability; they also resist staining and fading. There are many types of paint protection film available, including films with clear, matte, or satin finishes and films with self-healing properties.

Paint Protection Film and Other Coatings

3M paint protection film is the best choice for long-lasting protection against all sorts of environmental contaminants and other wear and tear. A full wrap with paint protection film provides the best protection, but some car owners prefer to wrap high traffic areas and use wax or a coating on the rest of the vehicle.

There are many ways to protect your vehicle’s exterior from the hazards of the daily commute and regular wear. When you want superior, long-lasting protection for your car, get a 3M paint protection film and enjoy the benefits it provides.

Be sure to treat your vehicle right by contacting the experts at Calgary Paint Protection Film. Invisible film protects your car without altering the appearance. You can always expect friendly and prompt service. We work around your schedule to provide maximum convenience. Keep your car looking like new, the easy way!

Phone: 587-324-1993

PAINT PROTECTION FILM

WINDOW TINT

VINYL WRAPS

DETAILING

Tag: Calgary paint protection films

Meticulous Cleaning Prior to 3M Car Wrap Application